The Oppo A8 mobile phone is a budget-friendly smartphone that was released in 2019. It has a 6.5-inch HD+ display, a MediaTek Helio P35 processor, 4GB of RAM, and 128GB of storage. The rear camera is a 12MP main camera, a 2MP macro camera, and a 2MP depth sensor. The front camera is an 8MP sensor. The battery is a 4230mAh unit that supports fast charging.

Here is a summary of the key features of the Oppo A8 mobile phone:

  • 6.5-inch HD+ display
  • MediaTek Helio P35 processor
  • 4GB of RAM
  • 128GB of storage
  • 12MP main camera, 2MP macro camera, and 2MP depth sensor
  • 8MP front camera
  • 4230mAh battery with fast charging support
  • Android 9 Pie operating system

How to Flash Mediatek CPU Phones :

Flashing a MediaTek (MTK) CPU-based device typically involves updating or replacing the firmware (often referred to as ROM or firmware flashing) on the device. This can be done for various reasons, such as upgrading to a newer Android version, fixing software issues, or installing custom ROMs. Here are the general steps to flash a MediaTek CPU-based device, like a smartphone or tablet:

**Important Note:** Flashing firmware can be risky, and if not done correctly, it can lead to a bricked device. Make sure you have a backup of your data, and proceed at your own risk. Also, be aware that flashing custom ROMs may void your warranty.

**Requirements:**

1. **Device-specific firmware:** You’ll need the firmware (stock ROM or custom ROM) specific to your device model. You can usually find these on the manufacturer’s official website, XDA Developers forum, or other reputable sources.

2. **USB Cable:** To connect your device to a computer.

3. **A Windows PC:** Most MediaTek flashing tools are designed for Windows.

4. **MediaTek USB VCOM Drivers:** You’ll need to install these drivers on your computer to communicate with the device. Search for “MediaTek USB VCOM Drivers” and download and install the appropriate ones for your Windows version.

5. **Flashing Tool:** SP Flash Tool is one of the most commonly used tools for flashing MediaTek devices. Download and install it on your computer.

**Steps to Flash MediaTek CPU-based Device:**

1. **Install USB VCOM Drivers:**
– After downloading the drivers, install them on your PC. This ensures your computer can communicate with your device in “Download” mode.

2. **Download Firmware:**
– Obtain the firmware for your specific device model from a reliable source.

3. **Prepare Your Device:**
– Charge your device to ensure it has enough power during the flashing process.
– Backup your important data as flashing will erase everything on the device.

4. **Launch SP Flash Tool:**
– Open the SP Flash Tool on your computer.

5. **Load Scatter File:**
– In SP Flash Tool, click on the “Scatter-loading” button.
– Navigate to the folder containing your firmware files and select the scatter file (.txt) that corresponds to your device.

6. **Connect Your Device:**
– Turn off your device.
– Connect your device to the computer using a USB cable.
– Press and hold specific buttons to enter “Download” mode or “Fastboot” mode (this varies by device, so refer to your device’s documentation or search online for instructions).

7. **Begin Flashing:**
– In SP Flash Tool, click on the “Download” button.
– The flashing process will start, and you’ll see a progress bar.

8. **Completion:**
– Once the process is complete, you’ll see a green circle or a “Download OK” message.

9. **Disconnect and Reboot:**
– Disconnect your device from the computer.
– Power on your device.

10. **First Boot:**
– The first boot may take longer than usual. Be patient.

Download OPPO A8 Convert To Global [With Google Play] [MultiLanguage – Arabic Turkey Farsi All Languages]

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.

 

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
100% Free SEO Tools - Tool Kits PRO

You cannot copy content of this page. DCMA Protected.