huawei flash file

Huawei Enjoy 10 Plus STK-AL00: A Budget-Friendly Option with a Large Display

The Huawei Enjoy 10 Plus STK-AL00 is an affordable smartphone released in September 2019. It boasts a large display, decent hardware, and a triple-lens rear camera, making it a good option for budget-conscious users.

Here’s a breakdown of its key specifications and pros and cons:

Specifications:

  • Display: 6.59-inch IPS LCD display with 1080 x 2340 pixels resolution and 19.5:9 aspect ratio.
  • Processor: HiSilicon Kirin 710F octa-core processor with 4x Cortex-A73 2.2 GHz + 4x Cortex-A53 1.7 GHz cores.
  • RAM: 4GB or 6GB.
  • Storage: 64GB or 128GB.
  • Cameras:
    • Triple rear camera system: 48MP main camera with f/1.8 aperture, 8MP ultrawide camera with f/2.4 aperture, and 2MP depth camera with f/2.4 aperture.
    • 16MP front camera with f/2.0 aperture.
  • Battery: 4000mAh battery with fast charging support.
  • Operating System: Android 9.0 Pie with EMUI 9.1.
  • Other features: Fingerprint sensor, rear-mounted, dual SIM support, no microSD card slot.

How to Flash Huawei Phones by Sigma Tools :

To flash a Huawei phone from the Sigma tool, you will need the following:

  • A computer with the Sigma tool installed
  • A USB cable to connect your phone to your computer
  • The firmware package for your model of Huawei phone

Once you have all of the necessary items, follow these steps:

  1. Connect your Huawei phone to your computer using the USB cable.
  2. Open the Sigma tool and select your Huawei phone model from the list of supported devices.
  3. Click on the “Flash” tab.
  4. Click on the “Browse” button and navigate to the firmware package that you downloaded.
  5. Click on the “Flash” button to begin the flashing process.

The Sigma tool will automatically flash your Huawei phone with the selected firmware. Once the flashing process is complete, your phone will restart.

Here are some additional tips for flashing a Huawei phone from the Sigma tool:

  • Make sure that you have downloaded the correct firmware package for your model of Huawei phone.
  • Back up your Huawei phone before flashing it.
  • Make sure that your Huawei phone is fully charged before flashing it.
  • Do not interrupt the flashing process.

Download Huawei Enjoy 10 Plus STK-AL00 Firmware and Chip Data File :

Download Huawei Enjoy 10 Plus STK-AL00 

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock

You cannot copy content of this page. DCMA Protected.