X-AGE G2 MT6739 Scatter Firmware Flash File

X-age is a mobile phone brand that primarily targets the Middle East, Central Asia, and Africa. They offer a variety of smartphones and feature phones at affordable prices. X Age is the brand known for its affordable lineup of tech accessories and featured phones in Nepal. The company last launched its affordable TWS buds, the X-Age ConvE Twins, and now the company has made a debut in the Nepali smartphone market with the launch of X-Age G2 along with X-Age A1.

The device packs a 3000 mAh battery, which charges via a micro USB port. For the biometric options, the device offers a rear-mounted fingerprint sensor and face unlock. The device also supports 4G.

X-Age G2 Overview

X Age G2 has a very interesting set of features. It offers low-budget device specs like dual camera, fingerprint sensor, notch display, and so on for the price range of entry-level smartphones.

Design and Display
The device body is made from plastic with a bluish-purple color gradient on the back panel. The rear panel with a glossy finish features a camera module, an LED flash, and a fingerprint sensor. It offers a 6 inch IPS LCD panel with an HD+ resolution of 720 x 1440 pixels. The screen features a waterdrop notch to house the selfie camera of the device.

Performance and Memory
Under the hood, X-Age G2 is powered by the Mediatek MT6739 processor with IMG PowerVR GE8100 GPU. It is available in the memory configuration of 3 GB RAM coupled with 32 GB of internal storage. It offers a dedicated microSD card slot that can be used to extend the memory to 64 GB when needed. As for the software part of the device, it comes with an Android 9 (Pie) preloaded.

Camera
The back panel on the device features a dual-camera setup consisting of a 13 MP primary lens and a 0.3 MP VGA sensor. Upfront, an 8 MP selfie camera sensor is housed inside the waterdrop notch.

Battery and Other Features
The device packs a 3000 mAh battery, which charges via a micro USB port. For the biometric options, the device offers a rear-mounted fingerprint sensor and face unlock. The device also supports 4G.

X-Age G2 Specifications

How to Flash Mediatek scatter file :

Here’s a guide on how to flash MTK scatter firmware:

1. Preparation:

• Download necessary tools:
  • SP Flash Tool: A free, official tool for flashing MTK devices. Download from trusted sources like the official MediaTek website or XDA Developers forums.
  • MediaTek USB drivers: Install the drivers to ensure proper communication between your PC and the phone.
  • Stock firmware: Obtain the correct firmware for your specific device model. It should include a scatter file (MTK_AllInOne_DA.bin).
  • Backup your data: Create a backup of any important data on your phone, as flashing firmware can erase it.

2. Install Drivers:

• Extract the MediaTek driver package and install the drivers on your PC.

3. Launch SP Flash Tool:

• Extract the SP Flash Tool package and run the flash_tool.exe file.

4. Load Scatter File:

• Click the “Scatter-loading” button in SP Flash Tool.
• Locate and select the scatter file (usually named MTK_AllInOne_DA.bin) from the extracted firmware folder.

5. Select Firmware Files:

• The scatter file will map out the firmware’s partitions.
• Ensure the correct firmware files are loaded for each partition. If files are missing, you may need to download a complete firmware package.

6. Choose Flash Mode:

• Select the appropriate flash mode:
  • Download Only: Flashes only the bootloader and partition table.
  • Firmware Upgrade: Flashes the entire firmware.

7. Connect Phone:

• Power off your phone completely.
• Connect it to your PC using a USB cable.

8. Start Flashing:

• Click the “Download” button in SP Flash Tool to initiate the flashing process.
• Do not disconnect the phone until the process is complete.
• You’ll see a progress bar and a green circle indicating success.

9. Disconnect and Reboot:

• Once flashing is successful, disconnect the phone and power it on.
• The first boot may take longer than usual.

Important Notes:

• Proceed with caution: Incorrect flashing can brick your device.
• Use correct firmware: Ensure you use firmware specifically designed for your device model.
• Back up data: Always back up important data before flashing.
• Research thoroughly: If you’re unsure, consult device-specific forums for detailed instructions and troubleshooting advice.
• Seek professional help: If you’re not comfortable with the process, consider seeking assistance from a qualified technician.

Download X-AGE G2 MT6739 Scatter Firmware Flash File
(The file is password protected but You will get it free if Needed, Send Email or use the chat option to contact us)

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.