Oppo A37 A37fEX_11_A.38_190711 Qualcomm Flash File Firmware

The Oppo A37 (model A37fEX) is a smartphone from Oppo that was released in 2016. Here are some key specifications and features of the Oppo A37:

1. Release Date: The Oppo A37 was released in June 2016.
2. Display: It features a 5.0-inch IPS LCD capacitive touchscreen with a resolution of 720 x 1280 pixels.
3. Processor: The device is powered by a quad-core Qualcomm Snapdragon 410 processor.
4. RAM and Storage: It typically comes with 2GB of RAM and 16GB of internal storage. There is also a microSD card slot for expandable storage.
5. Camera:
   • Rear Camera: 8 MP, f/2.0 aperture, autofocus, LED flash.
   • Front Camera: 5 MP, f/2.4 aperture.
6. Battery: The Oppo A37 is equipped with a non-removable Li-Ion 2630 mAh battery.
7. Operating System: It runs on Android 5.1 Lollipop with Oppo’s ColorOS 3.0 on top.
8. Connectivity: The phone supports 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.0, GPS, and a microUSB 2.0 port.
9. Build and Design: The device has a metal unibody design and is available in various colors.
10. Other Features: Dual SIM support, Face detection, HDR, and other standard smartphone features.

Here are the general steps on how to flash a Qualcomm CPU using QPST:

Prerequisites:

• Phone Model and Firmware:
  • Identify your phone’s exact model number and download the correct firmware package (usually a .mbn file) from the manufacturer’s website or a reliable source.
• QPST:
  • Download and install the latest version of QPST from the Qualcomm website.
• Drivers:
  • Install the Qualcomm USB drivers for your phone.
• Backup Data:
  • Flashing often erases data, so back up your important files before proceeding.
• EDL Mode:
  • Learn how to put your specific phone model into Emergency Download (EDL) mode, as this is crucial for flashing with QPST. It usually involves a button combination while powering on.

Steps:

1. Launch QPST:
   • Open the QPST software on your computer.
2. Connect Phone:
   • Turn off your phone and connect it to your computer using a USB cable.
3. Enter EDL Mode:
   • Put your phone into EDL mode using the specific method for your model.
4. Load Firmware:
   • In QPST, navigate to the “Tools” tab and select “Software Download.”
5. Select Image Files:
   • Browse for the .mbn firmware files you downloaded and select them in the appropriate order.
6. Start Flashing:
   • Click the “Start” button to initiate the flashing process.
7. Wait:
   • Do not disconnect your phone or interfere with the process. It can take several minutes.
8. Reboot:
   • Once flashing is complete, QPST will indicate success. Disconnect your phone and let it reboot normally.

Download Oppo A37 A37fEX_11_A.38_190711 Qualcomm Flash File Firmware

Oppo A37 A37fEX_11_A.38_190711 Qualcomm Flash File Firmware

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.