The Oppo A17K CPH2471 is a budget-friendly Android smartphone released in India in 2023. Here’s a breakdown of its key features:
Display:
- 6.56-inch IPS LCD display with a resolution of 1612 x 720 pixels.
- Waterdrop notch design.
Performance:
- MediaTek Helio G35 octa-core processor.
- 3GB of RAM.
- 64GB of internal storage.
- Expandable storage via microSD card (up to 256GB).
Cameras:
- Rear camera: 8MP with an LED flash.
- Front camera: 5MP.
Battery:
- 5000mAh battery with standard charging.
Software:
- Runs on ColorOS 12.1, based on Android 12.
Connectivity:
- Wi-Fi 5 (802.11ac).
- Bluetooth 5.0.
- Micro-USB port (not USB-C).
- 3.5mm headphone jack.
How to Flash MediaTek Scatter File :
Flashing a MediaTek (MTK) device using a scatter file involves using specific tools like SP Flash Tool. Here is a step-by-step guide on how to flash a MediaTek scatter file:
Before you start:
- Download Necessary Files:
- SP Flash Tool: This is a commonly used tool for flashing MediaTek devices.
- MediaTek USB VCOM Drivers: Ensure you have the correct USB drivers installed on your computer.
- Stock Firmware: Download the official stock firmware for your specific MediaTek device. It usually comes in a scatter file format.
- Install MediaTek USB VCOM Drivers:
- Before connecting your MediaTek device to the computer, make sure the MediaTek USB VCOM drivers are installed. If not, download and install them.
- Backup Data:
- Flashing firmware may erase your data. It’s essential to back up your important files and data before proceeding.
- Charge Your Device:
- Ensure your MediaTek device has sufficient battery charge to avoid any interruptions during the flashing process.
Flashing Process:
- Extract Files:
- Extract the downloaded SP Flash Tool and stock firmware files to a convenient location on your computer.
- Launch SP Flash Tool:
- Open the SP Flash Tool on your computer.
- Load Scatter File:
- In the SP Flash Tool, click on the “Choose” or “Scatter-loading” button and select the scatter file from the firmware folder you extracted earlier.
- Power Off Your Device:
- Turn off your MediaTek device.
- Connect Your Device:
- Use a USB cable to connect your MediaTek device to the computer.
- Start Flashing:
- In the SP Flash Tool, click on the “Download” button to begin the flashing process.
- Wait for Completion:
- The tool will now flash the firmware to your MediaTek device. Wait for the process to complete.
- Complete the Process:
- Once the flashing is done, you should see a success message in SP Flash Tool. You can now disconnect your device and reboot it.
Download Oppo A17K CPH2471 Firmware Flash File
Oppo A17K CPH2471 Firmware Flash File
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
