The model number Harry AL00CT is associated with the Huawei Honor 10 Lite (also sometimes referred to as the Huawei Honor 20e in some markets, although the 20e might have slight variations).
Here’s what we know about this model:
- Brand: Huawei (under the Honor sub-brand at the time of its release)
- Model: Honor 10 Lite
- Model Code: AL00CT (this is a specific variant code, likely indicating region or carrier customization)
Key Features of the Huawei Honor 10 Lite (based on general specifications, as the AL00CT variant might have slight differences):
- Display: 6.21-inch IPS LCD, Full HD+ resolution (1080 x 2340 pixels)
- Processor: HiSilicon Kirin 710F
- RAM: Typically 3GB or 4GB
- Internal Storage: Typically 32GB or 64GB, expandable via microSD card
- Rear Camera: Dual AI camera: 13 MP (wide) + 2 MP (depth sensor)
- Front Camera: 16 MP
- Battery: 3400 mAh
- Operating System: Android 9 Pie with EMUI 9.0 (likely received updates)
- Connectivity: Wi-Fi, Bluetooth, GPS, microUSB
- Other Features: Rear fingerprint sensor
Download Honor 10 Lite Harry AL00CT-BD 1.0.0.60 Board Software
Honor 10 Lite Harry AL00CT-BD 1.0.0.60 Board Software
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
