About Huawei Enjoy 9E :
The Huawei Enjoy 9e is a budget-friendly smartphone that offers good value for money. It has a large display, a powerful processor, and a long-lasting battery. However, the camera is not the best, and the software can be a bit cluttered.
- It was released in March 2019.
- It has a 6.09-inch IPS LCD display with a resolution of 720 x 1560 pixels.
- It is powered by a MediaTek Helio P35 octa-core processor and has 3GB of RAM.
- It has 32GB of internal storage, expandable up to 512GB via microSD card.
- It has a 13-megapixel rear camera and an 8-megapixel front-facing camera.
- It runs Android 9 Pie with EMUI 9.0 on top.
- It has a 3020mAh battery.
- It is available in three colors: Midnight Black, Sapphire Blue, and Aurora Purple.
To flash a dead boot using SP Flash Tool, you will need the following:
- A computer with Windows 7 or later
- The latest version of SP Flash Tool
- The firmware file for your phone
- A USB cable
Once you have all of the necessary requirements, you can follow these steps to flash your phone:
- Download and install the latest version of SP Flash Tool from the SP Flash Tool website.
- Download the firmware file for your phone from a trusted source.
- Extract the firmware file to a folder on your computer.
- Connect your phone to your computer using a USB cable.
- Launch SP Flash Tool.
- In SP Flash Tool, select the “Download” tab.
- In the “Download Agent” section, select the “MTK_AllInOne_DA.bin” file.
- In the “Scatter File” section, select the “scatter.txt” file from the firmware file folder.
- Click on the “Download” button to start the flashing process.
- Wait for the flashing process to complete.
- Once the flashing process is complete, your phone will be rebooted.
Download Huawei Enjoy 9e (MRD-AL00) Scatter Firmware
Huawei Enjoy 9e (MRD-AL00) Scatter Firmware
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
