Huawei Mate 20X EVR-AL00: A Powerful Smartphone with a Massive Display
The Huawei Mate 20X EVR-AL00, released in October 2018, offered a unique combination of a large display, powerful hardware, and advanced features. Here’s a breakdown of its key specifications and pros and cons:
Specifications:
- Display: 7.2-inch OLED display with 1080 x 2244 pixels resolution and 18.7:9 aspect ratio.
- Processor: HiSilicon Kirin 980 octa-core processor with 2x Cortex-A76 2.6 GHz + 2x Cortex-A76 1.92 GHz + 4x Cortex-A55 1.8 GHz cores.
- RAM: 6GB or 8GB.
- Storage: 128GB or 256GB.
- Cameras:
- Triple rear camera system: 40MP main camera with f/1.8 aperture, 20MP ultra-wide camera with f/2.2 aperture, and 8MP telephoto camera with f/2.4 aperture.
- 24MP front camera with f/2.0 aperture.
- Battery: 5000mAh battery with fast charging support.
- Operating System: Android 9.0 Pie with EMUI 9.0.
- Other features: IP53 water and dust resistance, face unlock, fingerprint sensor, dual SIM support.
How to Flash Huawei Phones by Sigma Tools :
To flash a Huawei phone from the Sigma tool, you will need the following:
- A computer with the Sigma tool installed
- A USB cable to connect your phone to your computer
- The firmware package for your model of Huawei phone
Once you have all of the necessary items, follow these steps:
- Connect your Huawei phone to your computer using the USB cable.
- Open the Sigma tool and select your Huawei phone model from the list of supported devices.
- Click on the “Flash” tab.
- Click on the “Browse” button and navigate to the firmware package that you downloaded.
- Click on the “Flash” button to begin the flashing process.
The Sigma tool will automatically flash your Huawei phone with the selected firmware. Once the flashing process is complete, your phone will restart.
Here are some additional tips for flashing a Huawei phone from the Sigma tool:
- Make sure that you have downloaded the correct firmware package for your model of Huawei phone.
- Back up your Huawei phone before flashing it.
- Make sure that your Huawei phone is fully charged before flashing it.
- Do not interrupt the flashing process.
Download Huawei Mate 20X EVR-AL00 Firmware and Chip Data File :
EVR-AL00 10.1.0.163(C00E160R2P8)_Firmware_EMUI10.1.0_05015FPS
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
