The Huawei Nova 5i is a mid-range smartphone that was released in February 2020. It is powered by the Kirin 710F processor, has a 6.4-inch Full HD+ display, and a triple-lens rear camera system.
Here are the key specifications of the Huawei Nova 5i:
- Display: 6.4-inch IPS LCD display with 1080 x 2310 pixels resolution and a 19.5:9 aspect ratio.
- Processor: Kirin 710F octa-core processor with a clock speed of up to 2.2 GHz.
- RAM: 6 GB.
- Storage: 128 GB.
- Rear camera: 24 MP main sensor, 8 MP ultrawide sensor, and 2 MP depth sensor.
- Front camera: 24 MP.
- Battery: 4000 mAh.
- Operating system: Android 10 with EMUI 10.1.
The Nova 5i is a solid mid-range smartphone that offers good performance, a decent camera, and a long-lasting battery. It is a good option for those looking for a budget-friendly phone that can handle everyday tasks and light gaming.
How to Flash Huawei Phones by Sigma Tools :
To flash a Huawei phone from the Sigma tool, you will need the following:
- A computer with the Sigma tool installed
- A USB cable to connect your phone to your computer
- The firmware package for your model of Huawei phone
Once you have all of the necessary items, follow these steps:
- Connect your Huawei phone to your computer using the USB cable.
- Open the Sigma tool and select your Huawei phone model from the list of supported devices.
- Click on the “Flash” tab.
- Click on the “Browse” button and navigate to the firmware package that you downloaded.
- Click on the “Flash” button to begin the flashing process.
The Sigma tool will automatically flash your Huawei phone with the selected firmware. Once the flashing process is complete, your phone will restart.
Here are some additional tips for flashing a Huawei phone from the Sigma tool:
- Make sure that you have downloaded the correct firmware package for your model of Huawei phone.
- Back up your Huawei phone before flashing it.
- Make sure that your Huawei phone is fully charged before flashing it.
- Do not interrupt the flashing process.
Download Huawei Nova 5i GLK-AL00 Firmware and Chip Data File :
GLK-AL00 10.0.0.125(C00E123R7P3)_Firmware_EMUI10.0.0_05015RSV
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
