The Infinix Hot 12i X665B is a budget-friendly smartphone that was released in 2022. It has a 6.6-inch HD+ IPS display, a MediaTek Helio A22 processor, 2GB/3GB/4GB of RAM, 64GB of storage, and a 5000mAh battery. The rear camera is a triple-lens setup with a 13MP main sensor, a 2MP depth sensor, and a 2MP AI sensor. The front-facing camera is an 8MP sensor.
Here are some of the key specifications of the Infinix Hot 12i X665B:
- Display: 6.6-inch HD+ IPS display (720 x 1612 pixels)
- Processor: MediaTek Helio A22
- RAM: 2GB/3GB/4GB
- Storage: 64GB
- Rear camera: 13MP main sensor, 2MP depth sensor, 2MP AI sensor
- Front-facing camera: 8MP sensor
- Battery: 5000mAh
- Operating system: Android 11 XOS 7.6
How to Flash Infinix Hot 12i X665B :
Flashing an MTK (MediaTek) CPU involves the process of installing or updating the firmware on a device that uses a MediaTek chipset. Please note that flashing firmware can be a complex procedure and carries certain risks. It is important to follow the instructions carefully and ensure you have a compatible firmware file for your specific device. Here’s a general guide on how to flash an MTK CPU:
1. Gather the necessary tools:
– A computer running Windows OS.
– USB data cable.
– Latest version of the SP Flash Tool (Smart Phone Flash Tool).
– MediaTek USB VCOM drivers specific to your device model.
– Stock firmware for your device (compatible with your device model and variant).
2. Install the MediaTek USB VCOM drivers:
– Download and extract the MediaTek USB VCOM drivers on your computer.
– Open the Device Manager on your computer (press Windows Key + X, then select Device Manager).
– Connect your device to the computer via USB cable.
– In the Device Manager, you should see your device listed with a yellow exclamation mark.
– Right-click on your device and select “Update driver.”
– Browse and locate the folder where you extracted the MediaTek USB VCOM drivers. Follow the on-screen instructions to install the drivers.
3. Prepare the SP Flash Tool and firmware:
– Download and extract the SP Flash Tool to a convenient location on your computer.
– Locate the stock firmware for your device and extract it to a folder on your computer.
4. Launch the SP Flash Tool:
– Navigate to the folder where you extracted the SP Flash Tool and double-click on “flash_tool.exe” to launch the tool.
5. Load the scatter file:
– In the SP Flash Tool, click on “Scatter-loading” and browse to the firmware folder.
– Select the scatter file (.txt or .xml) for your device. The scatter file is usually located in the firmware folder and contains information about the partition layout of your device.
6. Configure the flashing options:
– Review the available options in the SP Flash Tool, such as the firmware components to be flashed (e.g., preloader, boot, recovery, system), and select the appropriate options.
– Ensure that the “Download Only” option is selected.
7. Begin the flashing process:
– Power off your device completely.
– In the SP Flash Tool, click on the “Download” button.
– Connect your device to the computer using a USB cable while holding the Volume Up or Volume Down button (or a combination of buttons depending on your device) to enter the flashing mode.
– The SP Flash Tool will detect your device and initiate the flashing process. You will see a progress bar indicating the firmware installation.
8. Wait for the flashing process to complete:
– Once the flashing process is complete, you will see a green circle in the SP Flash Tool, indicating success.
– Disconnect your device from the computer.
Please note that the exact steps and options may vary depending on the version of the SP Flash Tool and the specific device you are flashing. It is crucial to refer to device-specific guides and tutorials to ensure the correct procedure is followed.
Download Infinix Hot 12i X665B DUMP Firmware Flash File :
Infinix Hot 12i X665B DUMP Firmware Flash File
X665B-H6222IJKL-R-OP-230706V703
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
