itel A48 L6006 is a budget-friendly smartphone released in 2022. It has a 6.1-inch IPS LCD display with a resolution of 720 x 1520 pixels, a Unisoc SC9832E processor, 2GB of RAM, and 32GB of storage. It also has a dual-camera system on the back, consisting of a 5MP main sensor and a secondary sensor, and a 5MP front-facing camera.
- 6.1-inch IPS LCD display: The display is decent for everyday use, but it is not the sharpest or brightest display on the market.
- Unisoc SC9832E processor: The processor is not very powerful, so you may experience some lag when running multiple apps or demanding games.
- 2GB of RAM: The RAM is sufficient for basic tasks, but you may need to close some apps before opening others.
- 32GB of storage: The storage space is enough for most users’ needs, but you may want to consider expanding it if you plan on storing a lot of photos or videos.
- Dual-camera system: The dual-camera system is not very good in low-light conditions, but it can take decent photos in good lighting.
- 5MP front-facing camera: The front-facing camera is good for taking selfies and video calls.
- 3000mAh battery: The battery is small, so you may need to charge it more than once a day if you are a heavy user.
- Android 10 (Go Edition): The phone runs on Android 10 (Go Edition), a lightweight version of Android designed for devices with limited resources.
How to Flash Unisoc SPD Device :
Flashing a device with a Unisoc (Spreadtrum) System on Chip (SoC) involves a series of steps using flashing tools specific to Spreadtrum devices. Here’s a general guide on how to flash a Unisoc (Spreadtrum) CPU:
- Download Required Files:
- Download and install Spreadtrum USB drivers on your computer.
- Download the specific firmware or ROM intended for your device model. Ensure it’s compatible and meant for flashing through Spreadtrum flashing tools.
- Download Spreadtrum Upgrade Tool (also known as SPD Flash Tool) compatible with your device.
- Install Spreadtrum USB Drivers:
- Install the Spreadtrum USB drivers on your computer. This ensures that your computer can communicate with the device when it’s in bootloader or download mode.
- Extract Firmware/ROM:
- Extract the firmware or ROM file you downloaded earlier to a location on your computer. Make sure all necessary files are extracted and readily accessible.
- Launch Spreadtrum Upgrade Tool:
- Open the Spreadtrum Upgrade Tool (SPD Flash Tool) on your computer. It’s typically an executable file (.exe).
- Load Firmware:
- In the Spreadtrum Upgrade Tool, locate and select the firmware or ROM files you extracted earlier. These files usually have extensions like .pac or .pac.sc.
- Boot Device into Download Mode:
- Power off your device completely.
- Press and hold the required button combination to boot your device into download mode or bootloader mode. This combination may vary depending on the device model but commonly involves holding volume keys or a combination of volume and power buttons.
- Connect Device to Computer:
- Once your device is in download mode, connect it to your computer using a compatible USB cable. The Spreadtrum Upgrade Tool should recognize the device if the USB drivers are installed correctly.
- Begin Flashing:
- In the Spreadtrum Upgrade Tool, click on the “Start Downloading” or “Upgrade” button to initiate the flashing process.
- Wait for the flashing process to complete. Do not disconnect the device during this process.
- Completion and Reboot:
- Once the flashing process is complete, you should see a success message in the Spreadtrum Upgrade Tool.
- Safely disconnect your device from the computer.
- You can now boot your device into the system. It might take a while to boot up for the first time after flashing.
- Final Checks:
- After booting up, perform a factory reset on your device for optimal performance.
- Verify that the device is functioning correctly and that the new firmware or ROM has been successfully flashed.
Download itel A48 L6006 Flash File Firmware
itel A48 L6006 Flash File Firmware
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
