The itel Vision 3 S661L is a budget-friendly smartphone released in 2023. It has a 6.6-inch HD+ display, an Unisoc SC9863A processor, up to 3GB of RAM, and up to 64GB of storage. It also has a dual-camera system on the back, consisting of a 8MP main sensor and a VGA secondary sensor, and a 5MP front-facing camera.
Features of itel Vision 3 :
- 6.6-inch HD+ display: The display is large and bright, making it great for watching videos and playing games.
- Unisoc SC9863A processor: The processor is powerful enough for most everyday tasks, including browsing the web, checking email, and using social media.
- Up to 3GB of RAM: The RAM ensures that the phone can run multiple apps smoothly without lagging.
- Up to 64GB of storage: There is enough storage space for most users’ needs.
- Dual-camera system: The dual-camera system on the back is decent for taking photos in good lighting conditions.
- 5MP front-facing camera: The front-facing camera is good for taking selfies and video calls.
- 5000mAh battery: The battery is large enough to last a full day on a single charge, even with moderate use.
- Android 11 (Go Edition): The phone runs on Android 11 (Go Edition), a lightweight version of Android designed for devices with limited resources.
- Fingerprint sensor and face unlock: The phone has a fingerprint sensor and face unlock for security.
How to Flash Unisoc SPD Device :
Flashing a device with a Unisoc (Spreadtrum) System on Chip (SoC) involves a series of steps using flashing tools specific to Spreadtrum devices. Here’s a general guide on how to flash a Unisoc (Spreadtrum) CPU:
- Download Required Files:
- Download and install Spreadtrum USB drivers on your computer.
- Download the specific firmware or ROM intended for your device model. Ensure it’s compatible and meant for flashing through Spreadtrum flashing tools.
- Download Spreadtrum Upgrade Tool (also known as SPD Flash Tool) compatible with your device.
- Install Spreadtrum USB Drivers:
- Install the Spreadtrum USB drivers on your computer. This ensures that your computer can communicate with the device when it’s in bootloader or download mode.
- Extract Firmware/ROM:
- Extract the firmware or ROM file you downloaded earlier to a location on your computer. Make sure all necessary files are extracted and readily accessible.
- Launch Spreadtrum Upgrade Tool:
- Open the Spreadtrum Upgrade Tool (SPD Flash Tool) on your computer. It’s typically an executable file (.exe).
- Load Firmware:
- In the Spreadtrum Upgrade Tool, locate and select the firmware or ROM files you extracted earlier. These files usually have extensions like .pac or .pac.sc.
- Boot Device into Download Mode:
- Power off your device completely.
- Press and hold the required button combination to boot your device into download mode or bootloader mode. This combination may vary depending on the device model but commonly involves holding volume keys or a combination of volume and power buttons.
- Connect Device to Computer:
- Once your device is in download mode, connect it to your computer using a compatible USB cable. The Spreadtrum Upgrade Tool should recognize the device if the USB drivers are installed correctly.
- Begin Flashing:
- In the Spreadtrum Upgrade Tool, click on the “Start Downloading” or “Upgrade” button to initiate the flashing process.
- Wait for the flashing process to complete. Do not disconnect the device during this process.
- Completion and Reboot:
- Once the flashing process is complete, you should see a success message in the Spreadtrum Upgrade Tool.
- Safely disconnect your device from the computer.
- You can now boot your device into the system. It might take a while to boot up for the first time after flashing.
- Final Checks:
- After booting up, perform a factory reset on your device for optimal performance.
- Verify that the device is functioning correctly and that the new firmware or ROM has been successfully flashed.
How to Flash itel Vision 3 S661LP SPD CPU Firmware Flash File
itel Vision 3 S661LP SPD CPU Firmware Flash File
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
