Oppo F1S 1601 Flash file Firmware

The Oppo F1s was a mid-range smartphone launched in 2016. It was marketed as a “selfie expert” phone due to its 16MP front-facing camera. The rear camera is 13MP. Other specs include a 5.5-inch 720p display, a MediaTek MT6750 processor, 3GB or 4GB of RAM, and 64GB of storage. The battery is 3075mAh. The phone originally ran Android 5.1 Lollipop, but it received an update to Android 6.0 Marshmallow.

The Oppo F1s is no longer a current phone, and it may be difficult to find new in 2024. However, you may be able to find it used online or at a local electronics store

Before You Begin:

• Backup your data: Flashing wipes your phone’s storage. Make sure to back up important files like photos, contacts, and messages.
• Download the correct firmware: Incorrect firmware can damage your phone. Search for the specific firmware for your Oppo F1s model and region. Trustworthy sources often include the manufacturer’s website or forums dedicated to your phone model.
• Install MTK drivers: Your computer needs drivers to recognize your phone in flashing mode. You can usually find these on the manufacturer’s website or included with the flashing tool.
• Find the flashing tool: SP Flash Tool is a common choice for MTK devices. Make sure you download the appropriate version for your computer’s operating system.

Flashing Process (General Steps):

1. Extract the downloaded firmware on your computer.
2. Launch the flashing tool and follow its instructions for loading the scatter file (usually found in the firmware folder).
3. Boot your phone into Flashing Mode: The specific method may vary depending on your model. It often involves a combination of holding power and volume buttons while the phone is off.
4. Connect your phone to your computer with a USB cable.
5. In the flashing tool, select the flashing mode (usually “Download” or “Firmware Upgrade”).
6. Initiate the flashing process according to the tool’s instructions.
7. Once the flashing is complete, your phone should reboot automatically.

How to Flash Oppo F1s :

1. Download and Extract Stock ROM Package on the Computer.
2. Once you have extracted the Stock ROM package, you will be able to get the Firmware
3. Install the required MTK driver on the computer.
4. After installing the USB Driver on your Computer, Launch any MTK Flash Tool
5. Once the Flash Tool is launched, Load the Stock ROM (Firmware) in the Flash Tool.
6. Connect your Device to the Computer using the USB Data Cable.
7. Click on the Download (in flash tool) button to start the flashing process.
8. Once the Flashing process is completed, Disconnect your device from the computer and restart it.

Download Oppo F1S 1601 Flash file Firmware

Oppo F1S 1601 Flash file Firmware

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.