Realme C21Y RMX3263 is a budget-friendly smartphone released in 2021. Realme C21Y is a good option for users on a tight budget who are looking for a phone for basic tasks like browsing the web, checking email, and using social media. However, if you need a phone for gaming or other demanding tasks, you may want to consider other options.
Display: 6.5-inch LCD with 720 x 1600 pixel resolution
Processor: Unisoc T610 octa-core
RAM: 3GB or 4GB
Storage: 32GB or 64GB (expandable with microSD card)
Cameras:
- Rear: 13MP main sensor, 2MP macro sensor
- Front: 5MP
Battery: 5000mAh with 10W charging
Operating System: Android 11 (Go Edition)
Other features: Fingerprint sensor, face unlock, 3.5mm headphone jack
Pros:
- Large display
- Good battery life
- Affordable price
- Decent performance for everyday tasks
Cons:
- Budget-friendly processor may struggle with demanding tasks
- Limited camera capabilities
- Not the latest version of Android (no update to Android 12 yet)
How to Flash Unisoc SPD Device :
Flashing a device with a Unisoc (Spreadtrum) System on Chip (SoC) involves a series of steps using flashing tools specific to Spreadtrum devices. Here’s a general guide on how to flash a Unisoc (Spreadtrum) CPU:
- Download Required Files:
- Download and install Spreadtrum USB drivers on your computer.
- Download the specific firmware or ROM intended for your device model. Ensure it’s compatible and meant for flashing through Spreadtrum flashing tools.
- Download Spreadtrum Upgrade Tool (also known as SPD Flash Tool) compatible with your device.
- Install Spreadtrum USB Drivers:
- Install the Spreadtrum USB drivers on your computer. This ensures that your computer can communicate with the device when it’s in bootloader or download mode.
- Extract Firmware/ROM:
- Extract the firmware or ROM file you downloaded earlier to a location on your computer. Make sure all necessary files are extracted and readily accessible.
- Launch Spreadtrum Upgrade Tool:
- Open the Spreadtrum Upgrade Tool (SPD Flash Tool) on your computer. It’s typically an executable file (.exe).
- Load Firmware:
- In the Spreadtrum Upgrade Tool, locate and select the firmware or ROM files you extracted earlier. These files usually have extensions like .pac or .pac.sc.
- Boot Device into Download Mode:
- Power off your device completely.
- Press and hold the required button combination to boot your device into download mode or bootloader mode. This combination may vary depending on the device model but commonly involves holding volume keys or a combination of volume and power buttons.
- Connect Device to Computer:
- Once your device is in download mode, connect it to your computer using a compatible USB cable. The Spreadtrum Upgrade Tool should recognize the device if the USB drivers are installed correctly.
- Begin Flashing:
- In the Spreadtrum Upgrade Tool, click on the “Start Downloading” or “Upgrade” button to initiate the flashing process.
- Wait for the flashing process to complete. Do not disconnect the device during this process.
- Completion and Reboot:
- Once the flashing process is complete, you should see a success message in the Spreadtrum Upgrade Tool.
- Safely disconnect your device from the computer.
- You can now boot your device into the system. It might take a while to boot up for the first time after flashing.
- Final Checks:
- After booting up, perform a factory reset on your device for optimal performance.
- Verify that the device is functioning correctly and that the new firmware or ROM has been successfully flashed.
Download Realme C21Y RMX3263 flash file firmware
Realme C21Y RMX3263 flash file firmware
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
