REALME NARZO 10 RMX2040 Latest Firmware (Stock Rom)
This flash file will upgrade , downgrade , reset pinlock , reset pattern lock , fix softwaare issue , bootloop problem , IMEI issue or dead issue. You need to have flash tool , flash file, usb driver , login details of flashtool for flashing. Remember that you cannot flash realme device without realme access. Realme flashing is not free. you need to have login details or visit repair store or message us on phonefirmware.
How to flash REALME NARZO 10 RMX2040 :
- Download flash file which is give below.
- Extract Downloaded firmware on the computer.
- Install USB Qualcomm/MTK Driver on the computer. If you have already installed then you can skip.
- Open MSM Flash tool.
- Load Flash file to Flashing Tool.
- Switch off you phone. Press Volume up + Download and Connect Mobile. In some cases you need to connect from recovery mode. Go to recovery mode , tap on version 1.2 few times abd connect mobile.
- When it shows green color , flashing will start. Dont touch data cable and pc cable while flashing.
Download REALME NARZO 10 RMX2040 firmware / flash file :
If you need paid service for realme flashing contact us on whatsapp http://bit.ly/pfadmin
You should have enough knowledge about flashing otherwise you may damange and brick your device while flashing. We are not responsible for any damage.
Please take a backup before you start flashing. All medias , contact , apps and settings will be deleted.
Remember us if you face any kinds of problem while flashing. we will try our best to guide you.