The Realme Narzo 50 RMX3286 is a budget-friendly smartphone that was released in 2022. It has a 6.6-inch IPS LCD display with a 120Hz refresh rate, a MediaTek Helio G96 processor, 4GB to 6GB of RAM, and 64GB to 128GB of storage. It also has a triple-camera system on the back, consisting of a 50MP main sensor, a 2MP macro sensor, and a 2MP depth sensor, and a 16MP front-facing camera.
- 6.6-inch IPS LCD display with a 120Hz refresh rate: The display is large, bright, and smooth, making it great for watching videos and playing games.
- MediaTek Helio G96 processor: The processor is powerful enough for most everyday tasks, including gaming.
- 4GB to 6GB of RAM: The RAM ensures that the phone can run multiple apps smoothly without lagging.
- 64GB to 128GB of storage: There is enough storage space for most users’ needs.
- Triple-camera system: The triple-camera system on the back is decent for taking photos in good lighting conditions.
- 16MP front-facing camera: The front-facing camera is good for taking selfies and video calls.
- 5000mAh battery: The battery is large enough to last a full day on a single charge, even with moderate use.
- 33W fast charging: The phone supports 33W fast charging, which can quickly charge the battery from 0% to 50% in about 30 minutes.
- Realme UI 3.0 based on Android 11: The phone runs on Realme UI 3.0, a custom version of Android that is feature-rich and easy to use.
How to Flash Scatter Firmware?
Flashing a Scatter firmware typically involves using SP Flash Tool, which is a flashing tool commonly used for MediaTek (MTK) devices. Here’s a step-by-step guide on how to flash Scatter firmware using SP Flash Tool:
- Download Required Files:
- Download and install MediaTek USB VCOM drivers on your computer. These drivers are necessary for your computer to recognize your MTK device in preloader and download mode.
- Download the specific Scatter firmware intended for your device model. Ensure it’s compatible and meant for flashing through SP Flash Tool.
- Download SP Flash Tool compatible with your computer’s operating system.
- Extract Firmware:
- Extract the Scatter firmware file you downloaded earlier to a location on your computer. This firmware typically comes in a compressed format like ZIP or RAR.
- Install MediaTek USB VCOM Drivers:
- Install the MediaTek USB VCOM drivers on your computer. Follow the installation instructions provided by the driver package.
- Launch SP Flash Tool:
- Open SP Flash Tool on your computer. It’s typically an executable file (.exe).
- Load Scatter File:
- In SP Flash Tool, click on the “Scatter-loading” button.
- Navigate to the location where you extracted the firmware files and select the scatter file. The scatter file usually has a .txt extension and contains information about the partition layout and firmware files.
- Prepare Your Device:
- Power off your device completely.
- Connect Device to Computer:
- Connect your device to your computer using a compatible USB cable. Ensure your device is powered off before connecting.
- Begin Flashing:
- In SP Flash Tool, click on the “Download” or “Firmware Upgrade” button to initiate the flashing process.
- SP Flash Tool will begin flashing the firmware onto your device. The progress will be displayed on the screen.
- Flashing Completion:
- Once the flashing process is complete, you should see a success message in SP Flash Tool.
- Safely disconnect your device from the computer.
- Boot Device into System:
- You can now boot your device into the system. It might take a while to boot up for the first time after flashing.
- Final Checks:
- After booting up, perform a factory reset on your device for optimal performance.
- Verify that the device is functioning correctly and that the new firmware has been successfully flashed.
Download Realme Narzo 50 RMX3286 Repair IMEI Original Downgrade Firmware
Realme Narzo 50 RMX3286 Repair IMEI Original Downgrade Firmware
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
