The model number SM-A135F refers to the Samsung Galaxy A13 (4G). Here’s a breakdown of its specifications and information about firmware (flash files):
Key Specifications of the Samsung Galaxy A13 (SM-A135F):
- Display: 6.6-inch PLS LCD, 1080 x 2408 pixels (FHD+), Corning Gorilla Glass 5
- Processor: Exynos 850 (8nm), Octa-core CPU
- RAM: 3GB, 4GB, or 6GB
- Internal Storage: 32GB, 64GB, or 128GB, expandable via microSDXC (dedicated slot)
- Rear Camera: Quad setup:
- 50 MP (wide), f/1.8, PDAF
- 5 MP (ultrawide), f/2.2
- 2 MP (macro), f/2.4
- 2 MP (depth), f/2.4
- Front Camera: 8 MP (wide), f/2.2
- Battery: 5000 mAh, non-removable, 15W wired charging
- Operating System: Android 12, upgradable to Android 13, One UI 5.1 (may have further updates to Android 14 with One UI 6.1 in some regions as of May 2025)
- Connectivity: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, GPS, NFC (market/region dependent), USB Type-C 2.0, OTG
- Sensors: Side-mounted fingerprint sensor, accelerometer, compass, virtual proximity sensing
- SIM: Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
Download SM-A135F U5 DUMP eMMC By Easy JTAG Plus
SM-A135F U5 DUMP eMMC By Easy JTAG Plus
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
