The model number PD2257F identifies the vivo Y100 5G.
Here’s a summary of its key specifications:
- Display: 6.67-inch AMOLED with a 120Hz refresh rate and FHD+ resolution (1080 x 2400 pixels).
- Processor: Qualcomm Snapdragon 4 Gen 2 (4 nm).
- RAM: 8GB, with an additional 8GB extended RAM.
- Internal Storage: 128GB or 256GB, expandable up to 1TB via microSD card.
- Rear Camera: Dual camera setup:
- 50 MP main camera (f/1.8).
- 8 MP ultrawide camera (f/2.2).
- Flicker sensor.
- Front Camera: 8 MP (f/2.0).
- Battery: 5000 mAh with 80W fast charging.
- Operating System: Android 14 with Funtouch OS 14.
- Connectivity: 5G, Wi-Fi (dual-band), Bluetooth 5.0, USB Type-C, GPS.
- Other Features: In-display fingerprint sensor, IP54 dust and water resistance.
Download Vivo Y100 5G PD2257F Flash file
Vivo Y100 5G PD2257F Flash file
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
