How to Flash MTK Phones like vivo y12?
Flashing an itel mobile device involves installing a new firmware on the device. Here are the general steps to flash an itel mobile device:
Note: Flashing firmware can result in data loss or bricking of the device if not done correctly. Make sure to backup your data and follow the steps carefully.
- Download the firmware: Download the correct firmware for your itel device from a trusted source. Make sure to download the latest version available and that it is compatible with your device’s model number.
- Install the itel USB driver: Download and install the itel USB driver on your computer. This driver is needed to connect your itel device to your computer in fastboot mode.
- Download the SP Flash Tool: Download and install the SP Flash Tool on your computer. SP Flash Tool is a utility that allows you to flash firmware on itel devices.
- Boot your device into fastboot mode: Turn off your itel device and boot it into fastboot mode by pressing and holding the Volume Down + Power buttons simultaneously.
- Connect your device to your computer: Connect your itel device to your computer using a USB cable. Make sure that your device is recognized by your computer and that the drivers are installed correctly.
- Open the SP Flash Tool: Open the SP Flash Tool software on your computer.
- Add firmware file to SP Flash Tool: Click on the “Scatter-loading” button in SP Flash Tool and select the scatter file from the firmware folder.
- Start the flashing process: Click on the “Download” button in SP Flash Tool to begin the firmware flashing process. Do not disconnect your device during the process, and wait until the flashing process is complete.
- Reboot your device: Once the firmware flashing process is complete, your itel device will automatically reboot. It may take some time for your device to boot up, so be patient.
That’s it! Your itel device should now be running the latest firmware. If you encounter any issues during the flashing process, it’s recommended to seek help from an experienced technician.
This File can fix :
- Hang on logo
- Vivo Dead after flash
- Vivo Dead after remove pattern
- Vivo Dead after remove frp
- White LCD issue
- remove pattern frp
Download Vivo Vivo Y12 PD1901 Firmware :
Vivo Y12 PD1901 Firmware Flash File
PD1901BF_EX_A_6.72.23 Scatter Firmware [Dead Boot Repair]
PD1901BF_EX_A_6.72.23_vivo_mtk_alps-release-r0
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
