The Vivo Y67L was released in 2016 and is a budget smartphone with a 5.5-inch 720×1280 display powered by the MediaTek MT6750 chipset. It has 4GB of RAM and 16GB of storage, expandable via a microSD card. The phone has a 13MP rear camera and a 5MP front-facing camera. It runs on Android 6.0 Marshmallow and is powered by a 3000mAh battery. The vivo Y67L is available in gold, rose gold, and silver.
Features of Vivo Y67L Smartphone :
- MediaTek MT6750 chipset
- 4GB of RAM
- 32GB of storage
- 13MP rear camera
- 5MP front-facing camera
- Android 6.0 Marshmallow
- 3000mAh battery
Converting a Chinese ROM to a global ROM on a Vivo device can be a challenging and risky process. It’s important to note that attempting to change the ROM on your device can void the warranty, and there is a risk of bricking your phone if not done correctly. Additionally, it may be against the terms of service of your device.
If you still want to proceed, here are general steps you might follow. However, keep in mind that the specific steps can vary depending on the model of your Vivo device, and there might not be a reliable method available for every model.
Prerequisites:
- Unlock the Bootloader:
- You may need to unlock the bootloader of your device before installing a custom ROM. This process can vary between different Vivo models, so you’ll need to look for specific instructions for your device.
- Install a Custom Recovery:
- After unlocking the bootloader, you might need to install a custom recovery such as TWRP (Team Win Recovery Project).
Steps:
- Download Global ROM:
- Find and download the official global ROM for your Vivo device from a reliable source. Make sure it’s compatible with your device model.
- Copy ROM to Device:
- Transfer the downloaded global ROM to your device’s internal storage or external SD card.
- Boot into Recovery Mode:
- Power off your device and then boot into recovery mode. The key combination to enter recovery mode can vary (commonly involves holding a combination of volume and power buttons). Look for the specific combination for your device.
- Backup:
- Before proceeding, it’s highly recommended to perform a full backup of your data using the custom recovery.
- Wipe Data:
- In the custom recovery, perform a factory reset or wipe data/factory reset. This will erase the current ROM and data on your device.
- Install ROM:
- Use the custom recovery to install the global ROM from the file you transferred to your device in step 2.
- Reboot:
- After the installation is complete, reboot your device.
- Setup:
- Follow the on-screen instructions to set up your device with the new ROM.
Download Vivo Y67L Convert To Global [With Google Play] :
Vivo Y67L Convert To Global [With Google Play]
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
