The Vortex T10M Pro is a budget-friendly Android tablet released in 2023. It offers decent specs and features for its price, making it a good option for everyday tasks like browsing the web, watching videos, and checking email. Here’s a breakdown of its key features:
Display:
- 10.1-inch IPS LCD display with a resolution of 1280 x 800 pixels.
- Multi-touch capacitive touchscreen.
Performance:
- MTK A22 octa-core processor.
- 4GB of RAM.
- 64GB of internal storage.
- MicroSD card slot for expandable storage (up to 128GB).
Cameras:
- 5MP rear-facing camera with an LED flash.
- 8MP front-facing camera.
Battery:
- 5000mAh battery with support for 5V/2A charging.
Software:
- Runs on Android 13.
Connectivity:
- Wi-Fi 802.11ac.
- Bluetooth 5.0.
- Micro-USB port.
- 3.5mm headphone jack.
How to Flash MTK CPU Phone :
- Identify your phone model: This is crucial for downloading the correct firmware and flashing tools. Look for the exact model number on the back of your phone or in the settings menu.
- Determine your purpose: Are you trying to recover from a bricked phone, install a custom ROM, or update the firmware? Different purposes involve different tools and files.
- Gather resources: You’ll need the following:
- Firmware package (usually a .zip file): Download the correct firmware package for your specific model and purpose from trusted sources like the official MediaTek website or reputable third-party forums.
- Flashing tool: Various tools are available for MediaTek phones, like SP Flash Tool, MTK Droid Tool, or the manufacturer’s official flashing tool. Choose the one compatible with your model and purpose.
- Drivers: Install the necessary drivers for your phone on your computer. You can usually find them on the MediaTek website or from your phone manufacturer.
- Back up your data: Flashing usually wipes your phone’s storage, so back up all your important files and photos before starting.
Flashing process:
- Extract the firmware package: Unzip the downloaded firmware package to a folder on your computer.
- Run the flashing tool: Open the flashing tool you downloaded on your computer.
- Select the firmware package: In the flashing tool window, locate the extracted firmware folder and choose the appropriate ZIP file.
- Clean all (optional): If you want to perform a clean install and wipe all data, check the “Clean all” checkbox in the tool (be careful, this erases everything!).
- Connect your phone: Turn off your phone and put it in Download Mode (instructions may vary depending on your model). This usually involves holding down a combination of buttons (e.g., power and volume down) for a few seconds. Connect your phone to your computer using a USB cable.
- Start flashing: If your phone is connected and detected in the flashing tool, click the “Flash” or “Start” button. The flashing process should begin automatically.
- Wait for completion: Do not disconnect your phone or perform any actions during the flashing process. This may take several minutes.
- Reboot your phone: Once the flashing is complete, your phone will reboot automatically. It may take some time for it to boot up to the home screen for the first time.
Download Vortex T10M Pro Firmware MT6761 Scatter Files
Vortex T10M Pro Firmware MT6761 Scatter Files
File password = HALABTECH
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
