About Nokia C1 1nd Edition :
The Nokia C1 2nd Edition is a budget-friendly smartphone that was released in July 2021. It has a 5.45-inch HD+ display, a 5MP rear camera, and a 5MP front-facing camera. It is powered by a Unisoc SC7731e quad-core processor and has 1GB of RAM and 16GB of storage. The Nokia C1 2nd Edition runs Android 11 (Go edition) and has a removable 2500mAh battery.
Here are some of the key features of the Nokia C1 2nd Edition:
- 5.45-inch HD+ display
- 5MP rear camera
- 5MP front-facing camera
- Unisoc SC7731e quad-core processor
- 1GB of RAM
- 16GB of storage
- Android 11 (Go edition)
- Removable 2500mAh battery
Nokia C1 2nd Edition TA-1380 Official Firmware Stock Rom / Flash File
This firmware can be used for :
1. Removing Pin Pattern Passcode of your device.
2. It can Fix LCD display
2. It can fix Problem of bootloop
4. It can fix problem of Hang on Logo
5. It can fix Problem of Dead or Recovery mode.
6. It can fix Google Lock or FRP of your device
How to Flash Nokia C1 2nd Edition TA-1380 Official Firmware Stock Rom / Flash File :
1- Download file
2- Download OSTLA Tool.
3- Install Driver within Tool Folder i.e. Nokia USB Driver.
4- Run OSTLA tool.
5- Select Software Image File i.e. Flash File
6- Connect Phone holding both Volume UP & down Key.
7- When the phone is connected to the tool, the Next button will get highlighted.
8- Click on Next.
9- Wait until Flashing is completed.
Download Nokia C1 2nd Edition TA-1380 Official Firmware Stock Rom / Flash File :
HMDSW_TA-1380-1220-0-00WW-B01-user_devicekit
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
