The Coolpad N7 Plus is an Android smartphone with a 6.53-inch HD+ display, a MediaTek Helio P22 processor, 4GB of RAM, 64GB of storage, and a 20MP rear camera. the Coolpad N7 Plus is a decent budget smartphone with a long battery life and a good camera. It is a good option for users who are looking for an affordable smartphone with some good features.
Here are some of the key features of the Coolpad N7 Plus:
- 6.53-inch HD+ display with a 19:9 aspect ratio
- MediaTek Helio P22 processor
- 4GB of RAM
- 64GB of storage
- 20MP rear camera
- 20MP front camera
- 4000mAh battery
- Android 9.0 Pie operating system
What is MTK Scatter ROM :
A scatter file is a text file that contains information about the firmware partitions on a MediaTek (MTK) device. It is used by flashing tools, such as SP FlashTool, to flash the firmware to the device. The scatter file includes the following information for each partition:
- Partition name
- Partition start address
- Partition size
- Partition checksum
The scatter file is essential for flashing firmware to MTK devices, as it ensures that the firmware is flashed to the correct partitions. Without the scatter file, the flashing tool would not be able to flash the firmware correctly, and this could damage the device.
Here is an example of a scatter file entry:
[MT6582_Android_scatter]
preloader_base=0x00000000,preloader_size=0x00100000
spare_image_base=0x00100000,spare_image_size=0x00400000
boot_image_base=0x00500000,boot_image_size=0x00100000
recovery_base=0x00600000,recovery_size=0x00200000
system_base=0x00800000,system_size=0x10000000
userdata_base=0x10800000,userdata_size=0x10000000
As you can see, the scatter file is a simple text file that contains a list of partitions and their corresponding information. The scatter file is essential for flashing firmware to MTK devices, and it should always be included with the firmware files.
Download Coolpad N7 Plus 2032 Scatter Rom Backup from UnlockTool
Coolpad N7 Plus 2032 Scatter Rom Backup from UnlockTool
password = phonefirmware.com/n7plus
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
