Download DUB-LX1 Y7 Pro 2019 file to repair frp , pattern , hang on logo and other softbrick issue.
The DUB-LX1 Y7 Pro 2019 is a smartphone model released by Huawei in March 2019. Here’s a summary of its key features:
Display:
- 6.26-inch IPS LCD display with a resolution of 720 x 1520 pixels.
- 19:9 aspect ratio.
Performance:
- Qualcomm Snapdragon 450 octa-core processor.
- 3GB or 4GB of RAM.
- 32GB or 64GB of internal storage.
- Expandable storage via microSD card (up to 512GB).
Cameras:
- Rear camera: 13MP with an f/1.8 aperture and phase-detection autofocus + 2MP depth sensor.
- Front camera: 8MP.
Battery:
- 4000mAh battery with 10W charging.
Software:
- Runs on Android 8.1 (Oreo) with EMUI 8.2.
Connectivity:
- Wi-Fi 802.11 b/g/n.
- Bluetooth 4.2.
- Micro-USB port.
- 3.5mm headphone jack.
This Firmware can be used for :
1. unbrick the device
2. upgrade or downgrade os
3. Fix OTA update issue
4. Fix the problem of hang on logo
5. Fix bugs on your phone
6. Fix other battery issues and lag issue
7. It can be used to remove FRP
Download DUB-LX1 Y7 Pro 2019 Firmware Flash File
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
