what is Huawei Honor FRP Lock?

Factory Reset Protection (FRP) is a security feature on Huawei devices that prevents unauthorized users from accessing the device after it has been factory reset. When FRP is enabled, the device will prompt for the previous Google account username and password that was used to set up the device before it can be used.

To bypass FRP on a Huawei device, you will need to know the previous Google account username and password that was used to set up the device. If you do not know the username and password, you will need to contact Huawei customer support for assistance.

Here are the steps on how to bypass FRP on a Huawei device:

  1. Turn on the device and follow the on-screen instructions until you reach the Sign in to Google screen.
  2. Enter the previous Google account username and password that was used to set up the device.
  3. If you do not know the username and password, contact Huawei customer support for assistance.
  4. Once you have successfully signed in, FRP will be disabled and you will be able to use the device.

Here are some tips to avoid FRP:

  • Do not factory reset your device unless you are sure that you know the previous Google account username and password.
  • If you are selling or giving away your device, make sure to factory reset it and remove your Google account from the device.
  • You can also disable FRP on your device by going to Settings > Security > Advanced > Factory reset protection and unchecking the Enable Factory reset protection checkbox.

FRP is a security feature that can help protect your device from unauthorized access. However, it is important to be aware of the steps involved in bypassing FRP in case you need to do so in the future.

How to Enter Fastboot Mode :

Fastboot mode is a special mode that allows you to interact with your Android device at a lower level than normal. This can be useful for things like flashing custom ROMs, rooting your device, or recovering from a bricked device.

To enter Fastboot mode, you will need to:

  1. Turn off your device.
  2. While the device is turned off, hold down the power button and the volume down button.
  3. Keep holding down the power button and the volume down button until you see the fastboot logo appear on the screen.
  4. Once you see the fastboot logo, you can release the power button and the volume down button.

Your device is now in fastboot mode. You can use a USB cable to connect your device to a computer and use the fastboot command-line tool to interact with your device.

Here are some of the things you can do in fastboot mode:

  • Flash a custom ROM
  • Root your device
  • Recover from a bricked device
  • Unlock the bootloader
  • Perform a factory reset

The process to Remove Huawei Honor FRP by FRP Key Code :

Here are the steps on how to use the Huawei FRP Key Code Tool :

  1. Download the Huawei FRP Key Code Fastboot Erase Tool from below
  2. Once the tool is downloaded, open it and connect your Huawei device to your computer on Fastboot Mode
  3. Click Read Fastboot Info First or Click On Read Serial Number. You Need Serial or IMEI to get FRP Key code.
  4. Order FRP Keycode with your seller
  5. Once You get Key code, Reopen Tool
  6. Connect your Huawei device to your computer on Fastboot Mode Again
  7. Click on “Erase FRP  by Code ” on Tool
  8. Check Your Huawei Device, It should be Reboot and Shows Factory Reset Screen.
  9. All Done Enjoy

Download Huawei Honor FRP Key Tool :

  1. Easy Unlocker Fastboot reader v1
  2. Erase Tool Fastboot Version V1006
  3. DC Unlocker to Client Tool

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.

 

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
100% Free SEO Tools - Tool Kits PRO

You cannot copy content of this page. DCMA Protected.