Huawei Mate 20 Pro LYA-AL00 Firmware Flash File

The Huawei Mate 20 Pro is a high-end smartphone that was released in October 2018. It has a 6.39-inch OLED display, a Kirin 980 processor, 6GB/8GB of RAM, and 128GB/256GB of storage. The rear camera is a triple-lens system with a 40MP main sensor, a 20MP ultrawide sensor, and an 8MP telephoto sensor. The front camera is a 24MP sensor. It runs on Android 9 Pie with EMUI 9.0 on top.

Here are some of the key features of the Huawei Mate 20 Pro:

• 6.39-inch OLED display with 1440 x 3120 pixels resolution
• Kirin 980 octa-core processor
• 6GB/8GB of RAM
• 128GB/256GB of storage
• Triple-lens rear camera system (40MP + 20MP + 8MP)
• 24MP front-facing camera
• 4200mAh battery with 40W fast charging
• Android 9 Pie with EMUI 9.0

Here are the steps on how to flash a Huawei phone using the Huawei Flash Tool:

1. Download and install the Huawei Flash Tool on your computer.
2. Download the firmware for your phone. You can find the firmware for your phone on the Huawei website or on a third-party website.
3. Extract the firmware file.
4. Connect your phone to your computer using a USB cable.
5. In the Huawei Flash Tool, click on the “Download” tab.
6. Select the firmware file that you extracted in step 3.
7. Click on the “Start” button.
8. The Huawei Flash Tool will start flashing the firmware to your phone.
9. Once the flashing is complete, your phone will reboot.

or you can use Sigma or Cheetah or any other box online tools for flashing

Download Huawei Mate 20 Pro LYA-AL00 Firmware Flash File

Huawei Mate 20 Pro LYA-AL00 Firmware Flash File

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.