huawei flash file

About P40 Pro ELS-N29 Phone :

The ELS-N29 is a high-end smartphone that offers excellent performance, a great camera system, and a long-lasting battery. It is a good choice for users who are looking for the best possible smartphone experience.

  • Display: 6.58-inch OLED display with a resolution of 2640 x 1200 pixels
  • Processor: Kirin 990 5G processor
  • RAM: Up to 8GB
  • Storage: Up to 512GB
  • Rear camera: 50MP main sensor, 40MP ultrawide sensor, 12MP telephoto sensor, TOF 3D sensor
  • Front-facing camera: 32MP sensor
  • Battery: 4200mAh battery
  • Charging: 40W wired charging, 27W wireless charging, 27W reverse wireless charging
  • Operating system: Android 10 with EMUI 10.1

To flash a Kirin 990 CPU, you will need the following:

  • A computer with a USB port
  • A USB cable
  • The latest version of the HiSuite
  • The firmware for your device

Once you have all of the necessary files, follow these steps:

  1. Download and install the HiSuite on your computer.
  2. Connect your device to your computer using a USB cable.
  3. Put your device into download mode. To do this, follow the instructions in your device’s manual.
  4. Open the HiSuite and select the firmware file that you downloaded in step 1.
  5. Click the “Start” button to begin the flashing process.
  6. The flashing process may take several minutes to complete. Once the flashing process is complete, your device will reboot.

How to Flash Kirin CPU :

Here are some additional tips for flashing a Kirin 990 CPU:

  • Make sure that you download the correct firmware for your device. If you download the wrong firmware, you could brick your device.
  • Make sure that your device is fully charged before you begin the flashing process.
  • Do not disconnect your device from your computer during the flashing process.
  • If you encounter any problems during the flashing process, stop and contact a qualified technician.

Here are some of the benefits of flashing a Kirin 990 CPU:

  • It can be used to fix problems with the phone’s software.
  • It can be used to update the phone’s software to the latest version.
  • It can be used to root the phone.

Overall, flashing a Kirin 990 CPU is a useful tool for fixing problems with Kirin 990-powered smartphones. However, it is important to be aware of the risks involved before using it.

Download P40 Pro plus ELS-N29 11.0.0.186 Firmware Flash File

P40 Pro plus ELS-N29 11.0.0.186 Firmware Flash File

ELS-N29 11.0.0.236(C432E3R6P4)_Firmware_EMUI11.0.0_05016PSR

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock

You cannot copy content of this page. DCMA Protected.