Samsung Galaxy A22 5G A226B is a mid-range smartphone that was released in June 2021. It has a 6.6-inch IPS LCD display, a MediaTek Dimensity 700 processor, 4GB/6GB/8GB of RAM, and 64GB/128GB of storage. The rear camera is a quad-lens system with a 48MP main sensor, an 8MP ultrawide sensor, a 2MP macro sensor, and a 2MP depth sensor. The front camera is a 13MP sensor. It runs on Android 11 with One UI 3.1 on top.
some of the key features of the Samsung Galaxy A22 5G A226B:
- 6.6-inch IPS LCD display with 1080 x 2400 pixels resolution
- MediaTek Dimensity 700 octa-core processor
- 4GB/6GB/8GB of RAM
- 64GB/128GB of storage
- Quad-lens rear camera system (48MP + 8MP + 2MP + 2MP)
- 13MP front-facing camera
- Android 11 with One UI 3.1
- 5000mAh battery with 15W fast charging
How to Flash Scatter Firmware :
steps on how to flash scatter firmware using the SP Flash Tool:
- Download and install the SP Flash Tool on your computer.
- Download the scatter firmware for your phone. You can find the scatter firmware for your phone on the manufacturer’s website or on a third-party website.
- Extract the scatter firmware file.
- Connect your phone to your computer using a USB cable.
- In the SP Flash Tool, click on the “Download” tab.
- Select the scatter firmware file that you extracted in step 3.
- Click on the “Start” button.
- The SP Flash Tool will start flashing the firmware to your phone.
- Once the flashing is complete, your phone will reboot.
It is important to note that flashing a phone can be risky and may void your warranty. So, it is important to do your research before proceeding.
Here are some additional things to keep in mind when flashing scatter firmware:
- Make sure that the scatter firmware is compatible with your phone.
- Back up your data before flashing the firmware.
- Follow the instructions carefully to avoid bricking your phone.
Download Samsung A22 5g A226B U5 OS12 Scatter Firmware [Dead Boot Repair]
Samsung A22 5g A226B U5 OS12 Scatter Firmware [Dead Boot Repair]
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
