The Xiaomi Redmi 9C, with the codename “angelica,” is an entry-level smartphone that was first announced in June 2020 and released in August 2020. Here’s a detailed overview:
Key Specifications:
- Display: 6.53-inch HD+ Dot Drop display with a resolution of 720 x 1600 pixels and a 20:9 aspect ratio.
- Processor: MediaTek Helio G35 (12 nm) with an octa-core CPU (4×2.3 GHz Cortex-A53 & 4×1.8 GHz Cortex-A53) and PowerVR GE8320 GPU.
- RAM: Available in 2GB, 3GB, or 4GB options.
- Internal Storage: Available in 32GB, 64GB, or 128GB options, with a dedicated microSDXC card slot for expansion.
- Rear Camera: Triple camera setup:
- 13 MP main camera (f/2.2, wide, PDAF)
- 2 MP macro camera (f/2.4)
- 2 MP depth sensor (f/2.4)
- Features include LED flash, HDR, and 1080p@30fps video recording.
- Front Camera: 5 MP selfie camera (f/2.2, wide) with HDR and 1080p@30fps video recording.
- Battery: 5000 mAh non-removable battery with 10W charging.
- Operating System: Originally launched with Android 10 and MIUI 12, it has received updates to Android 11 with MIUI 12.5 in some regions.
- Connectivity: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, Bluetooth 5.0, GPS, GLONASS, BDS, FM radio, microUSB 2.0, and USB OTG. Some variants may include NFC.
- Sensors: Rear-mounted fingerprint sensor, accelerometer, and proximity sensor.
- SIM: Dual SIM (Nano-SIM, dual stand-by).
Download Xiaomi 9C (angelica) ENG Firmware (Engineering Rom)
Xiaomi 9C (angelica) ENG Firmware (Engineering Rom) Keep NV
Redmi 9C (angelica)ENG Firmware (Engineering Rom)
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
