huawei flash file

About Honor 6x :

The Honor 6X was well-received by critics, with praise for its design, performance, and camera. It was also a commercial success, selling over 10 million units in its first year.

  • It has a 5.5-inch Full HD display, a Kirin 655 octa-core processor, 3GB or 4GB of RAM, and 32GB or 64GB of storage.
  • It has a dual-lens rear camera system with a 12MP main sensor and a 2MP depth sensor, and an 8MP front-facing camera.
  • It runs Android 6.0 Marshmallow with Huawei’s EMUI 4.1 user interface.
  • It has a 3340mAh battery and supports fast charging.
  • It is available in a variety of colors, including gold, silver, and gray.

To flash the Honor 6X, you will need the following:

  • A computer with a USB port
  • A USB cable
  • The latest firmware for your Honor 6X
  • A file manager app
  • A USB driver for your Honor 6X

Once you have all of the necessary tools, follow these steps to flash your Honor 6X:

  1. Download the latest firmware for your Honor 6X from the Huawei website.
  2. Extract the firmware file to a folder on your computer.
  3. Connect your Honor 6X to your computer using a USB cable.
  4. Open a file manager app on your computer.
  5. Navigate to the folder where you extracted the firmware file.
  6. Copy the firmware file to the root of your Honor 6X’s internal storage.
  7. Disconnect your Honor 6X from your computer.
  8. Turn off your Honor 6X.
  9. Hold down the Volume Down button and the Power button at the same time.
  10. When the Honor logo appears, release the Volume Down button.
  11. Use the Volume Up and Volume Down buttons to scroll to the option that says “Fastboot” and press the Power button to select it.
  12. Your Honor 6X will now boot into Fastboot mode.
  13. Open a command prompt window on your computer.
  14. Navigate to the folder where you extracted the firmware file.
  15. Type the following command and press Enter:
Code snippet
fastboot flash all ./filename.img

Replace filename.img with the name of the firmware file you downloaded.

  1. Wait for the flashing process to complete.
  2. Once the flashing process is complete, type the following command and press Enter:
Code snippet
fastboot reboot

Your Honor 6X will now reboot and start up normally.

It is important to note that flashing your Honor 6X will erase all of the data on your device. Make sure to back up your data before you begin the flashing process.

Download Honor 6x BLN-L21 C185B381 Official Firmware Flash File

Honor 6x BLN-L21 C185B381 Official Firmware Flash File

Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.

Please Follow these Before Flashing :

▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.

▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

▶️ Download and Install the Proper Drivers and Tools required before flashing.

▶️ If You Need Any Other Firmware or Flash File, Let Us Know.

 

 

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
100% Free SEO Tools - Tool Kits PRO

You cannot copy content of this page. DCMA Protected.