Redmi Note 10 mojito is a good option for budget-minded users who are looking for a large-screen phone with a long battery life. However, if you’re looking for a premium smartphone with the latest features, you might want to consider other options.
- 6.43-inch FHD+ (2340 x 1080) IPS LCD display with a 60Hz refresh rate.
- Corning Gorilla Glass 3 protection.
- Plastic back and frame.
- Available in three colors: Pebble White, Shadow Black, and Aqua Green.
Performance:
- Qualcomm Snapdragon 678 octa-core processor.
- 4GB or 6GB of RAM.
- 64GB or 128GB of eMMC storage.
- microSD card slot for expandable storage.
Cameras:
- Quad-camera rear system:
- 48MP main sensor with an f/1.8 aperture.
- 8MP ultrawide sensor with an f/2.2 aperture.
- 2MP macro sensor with an f/2.4 aperture.
- 2MP depth sensor with an f/2.4 aperture.
- 13MP front-facing camera with an f/2.2 aperture.
Battery and Software:
- 5000mAh battery with support for 18W fast charging.
- Runs on MIUI 12.5, based on Android 11.
How to Flash Mi phone from mi flash tool?
Flashing a Mi phone using the Mi Flash Tool can be a delicate process. While it can help in cases like software crashes, installing new ROMs, or recovering bricked devices, it’s important to proceed with caution and only if you’re comfortable with technical steps. Here’s a general guide to get you started, but remember to research your specific Mi phone model and purpose for flashing before proceeding:
Preparation:
- Identify your Mi phone model: This is crucial for downloading the correct firmware and flashing steps. Check the model number on the back of your phone or in the settings menu.
- Back up your data: Flashing usually wipes your phone’s storage, so back up all your important files and photos before starting.
- Download the necessary files: You need the following:
- Firmware package: Download the correct firmware package for your specific model from the official Xiaomi website or trusted third-party sources. It should be a .zip file.
- Mi Flash Tool: Download the latest version of the Mi Flash Tool from the official Xiaomi website.
- Drivers: Install the necessary drivers for your phone on your computer. You can find them on the Xiaomi website or from your phone manufacturer.
- Charge your phone: Make sure your phone’s battery is at least 50% charged to avoid interruptions during the flashing process.
Flashing process:
- Extract the firmware package: Unzip the downloaded firmware package to a folder on your computer.
- Run the Mi Flash Tool: Open the Mi Flash Tool on your computer.
- Select the firmware package: In the Mi Flash Tool window, click the “Select” button and navigate to the extracted firmware folder. Choose the .zip file containing the firmware.
- Clean all (optional): If you want to perform a clean install and wipe all data, check the “Clean all” checkbox. Be careful, as this will erase everything on your phone.
- Connect your phone: Turn off your phone and put it in Fastboot mode. This usually involves holding down a combination of buttons (e.g., power and volume down) for a few seconds. Connect your phone to your computer using a USB cable.
- Start flashing: If your phone is connected and detected in the Mi Flash Tool, click the “Flash” button. The flashing process should start automatically.
- Wait for completion: Do not disconnect your phone or perform any actions during the flashing process. This may take several minutes.
- Reboot your phone: Once the flashing is complete, your phone will reboot automatically. It may take some time for it to boot up to the home screen for the first time.
Download Redmi Note 10 mojito global Firmware Flash File
mojito_global_images_V12.5.5.0.RKGMIXM_20220124.0000.00_11.0_global_8845f1fa7a
mojito_global_images_V14.0.8.0.SKGMIXM_20231018.0000.00_12.0_global_a7349c8657
Join Our Telegram Group. If you have any problems then comment below or message us. We try our best to help you. If you found this post and our site helpful then Dont forget to like and share our page.
Please Follow these Before Flashing :
▶️ Disclaimer: Firmware flashing is not an easy process and should be carried out only if you have enough knowledge. We are not responsible for any damage/ dead to your device.
▶️ Take a Backup: If you are going to flash the above firmware on your Lava device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.
▶️ Download and Install the Proper Drivers and Tools required before flashing.
▶️ If You Need Any Other Firmware or Flash File, Let Us Know.
